Airbrushing Tutorials Video

Scale Modeling How To: Airbrushing, Part 3 – Using and cleaning your airbrush

After you’ve picked out your airbrush, and procured your air source, it’s time to start airbrushing! This simple video guide will help you understand thinning, spraying, color changes, and cleaning.

Please consider subscribing to my Youtube Channel to keep up with all the Scale Modeling How-To series!

2 comments

  1. I have been airbrushing for years, models and illustration. Even my airbrush teacher in art school used the 2% milk analogy but she never demonstrated why and what that looks like in the color cup. I really learned something from this video. Thanks!
    I had used a glass eyedropper to mix paint in the past, adding the paint to thinner in the cup then sucking it back into the dropper, drop back into the cup, repeat… Worked well with enamels and if you are using exact ratios. I used a plastic palette and a brush to mix up acrylics but, I’m going to try the in cup with a brush next time. Makes for less things to clean later as well as speeding the paint process.
    I had found that lacquer thinner just eats up acrylic paint and flushes the airbrush quickly. However, in the long run I think that really damaged the inner seals of my airbrush. So now I have switched to the alcohol, usually a high-proof moonshine. Just spray it into your mouth until you can no longer taste paint.**

    ** Actually, that is a really bad idea, don’t do that! 😜😳 Moonshine is great for cleaning vinyl records, but that’s another story…

    1. I’m so glad you found it helpful Tom! 😀

      It is amazing how the simple process of putting milk in the airbrush makes things so clear. I highly recommend it!

      Let me know how you like mixing in the cup – it’s a bit of “seat of the pants flying”, but when you have a solid visual grasp on proper thinning, rather than a strict ratio, it goes very fast. Eventually you just “know” how much works.

      Thanks for keeping up with my work!

Leave a Reply

Your email address will not be published. Required fields are marked *